Your shopping cart is empty.

Kenwood KAC-M1824BT Compact BLuetooth 4-Channel Digital Amplifier With Remote Control, For Car, Grey

Item: 46-KAC-M1824BT

$409.97

Compact BLuetooth 4-Channel Digital Amplifier With Remote

GENERAL FEATURES
Signal to Noise Ratio: 90 dB
RMS POWER Output 4?: 45W x 4
RMS POWER Output 2?: 45W x 4
RMS POWER Output Bridged: 90W x 2
Dimensions(WxHxD): 5-11/16" x 1-3/4" x 3-7/8"
Singal Sensing Turn-on

BUILT-IN BLUETOOTH
With today's smartphones hosting a wide variety of listening choices such as stored music, internet radio, podcasts, etc., it is no wonder that customers want to use this as their primary listening source. Bluetooth offers the easiest and most popular connection, KAC-M1824BT is not only your standalone Bluetooth gateway but if used with an in-dash receiver, it will double the power of a typical CD receiver with it's built-in 45Watts x 4 of amplification. A water resistant controller can be used to adjust volume and change tracks.

MULTI-APPLICATION
Many of today's powersports have very limited space to work in and tend to be a harsh environment for electronics because of the exposure to outdoor environments. KENWOOD's compact performance amplifiers are small in size so they fit even the most limited installation areas. The amplifiers also use a conformal coated main PCB (printed circuit boards) which offer extra layers of protection to help prevent moisture or damp air from damaging the product.

IPX5 REMOTE CONTROL
The KAC-M1824BT remote control is designed to be mounted in places that are exposed to the elements. To operate in these conditions the remote control has a IPX-5 certification. This water resistant certification is the grade at which a device continues to function when directly subjected to 12.5 L of water per minute from all directions using a 6.3 mm inside diameter nozzle at a distance of approximately 3m for at least 3 minutes. This level of water resistance makes it perfect for ATV, Motorcycles and boats.

SPECIFICATION

AMPLIFIER TYPE
Amplifier Type: Class D

CEA-2006 PRIMARY RATINGS
Power Output: 45Watts RMS x 4 at 4 Ohms and ?1%THD+N
Signal-to-Noise Ratio: 74dBA (Reference: 1Watt into 4Ohms)

MAXIMUM POWER OUTPUT
Max Power: 400W

SPECS
Signal to Noise Ratio: 90dB (Reference: Rated Power into 4Ohms at 14.4V)
Frequency Response: 20Hz-20kHz (+0dB, -1dB)
Input Impedance: 10k ohm
Speaker Impedance: 4?

TERMINALS
Battery & Ground: MOLEX Connector with 1500mm Wire
Speaker Output: MOLEX Connector with 1500mm Wire
Line In: RCA (Ni)
Line Out: RCA (Ni)

GENERAL
Dimensions(WxHxD): '5-11/16 X '1-3/4 X '3-7/8 inch
Operating Voltage: 14.4V(11-16V allowable)

KEY FEATURES
CEA-2006 Compliant
Class D
2 Ohms Load Capability
Speaker Level Input
Signal Sensing Turn-on
Power MOS-FET Switching Power Supply
Extruded Aluminum Heat Sink Design
Line Output Terminals for Extension
BLUETOOTH

OTHERS
apt-X
AAC

Customize your order

Sold Out

Free Shipping on all orders of 50$ and more!

FREE SHIPPING ON ALL ORDERS OF 50$ AND MORE!

We now offer free shipping on orders of 50.00$ and more! (10.00$ shipping on 49.99$ orders or less) ENJOY!

JUST SEEN