Conformal Coated 5 -Channel Power Amplifier
. Max Power 1600W
. Variable Low-Pass Filter
. Variable High-Pass Filter
. Bass Boost
SPECIFICATIONS
CEA-2006 PRIMARY RATINGS
Power Output: 50 Watts RMS x 4 + 300 Watts RMS x 1 at 4 Ohms and 1%THD+N
Signal-to-Noise Ratio: 80dBA (Reference: 1Watt into 4Ohms)
MAXIMUM POWER OUTPUT
Max Power: 1600W
RATED POWER OUTPUT AT 14.4V
A/B (4 Ohms): 50Watts RMS x 4 (4 Ohms, 20-20kHz, 1.0% THD)
A/B (2 Ohms) :75Watts RMS x 4 (2 Ohms, 1kHz, 1.0% THD)
SUB (4 Ohms) :300Watts RMS x 1 (4 Ohms, 20-200Hz, 0.5% THD)
SUB (2 Ohms) :500Watts RMS x 1 (2 Ohms, 100Hz, 0.5% THD)
A/B (Bridged 4Ohms): 150Watts RMS x 2 (Bridged 4 Ohms, 1kHz, 1.0% THD)
SPECS
Signal to Noise Ratio: 100dB (Reference: Rated Power into 4Ohms at 14.4V)
Frequency Response: 20Hz-50kHz (+0dB, -3dB) A/B 20Hz-200Hz (+0dB, -3dB) SUB
Input Impedance:10k ohm
Speaker Impedance: 4 (2 to 8 allowable)
Bridged Connection: 4 to 8 allowable
AUDIO SECTION
Low-Pass Filter: 50Hz-200Hz, -24dB/oct (SUB)
High-Pass Filter: 50Hz-200Hz, -12dB/oct (A/B)
Bass Boost: 40Hz, 0dB - +18dB (SUB)
RCA Input Sensitivity: 0.2[V] - 5.0 [V]
Speaker Level Input Sensitivity: 4.0[V] - 12.0 [V]
TERMINALS
Battery & Ground: M6 Screw Type Terminal Block
Speaker Output: M4 Screw Type Terminal Block
GENERAL
Dimensions(WxHxD): 9 x 2-3/16 x 7-3/8 [inch]
Operating Voltage :14.4V(11-16V allowable)
Current Consumption: 58[A]
KEY FEATURES
CEA-2006 Compliant
2 Ohms Load Capability
Speaker Level Input with Signal Sensing Turn-on
Power MOS-FET Switching Power Supply
Extruded Aluminum Heat Sink Design
A B Sub Independent Gain Adjustment
